OPNSense with Zerotier Setup – Network Bridge
Below are the steps required to get Zerotier setup on your OPNsense router to act as a network bridge between your Localnetwork and Clients with Zerotier client installed on remote networks. In ZT network screen: Managed routes: An IP assigned to the ZT network for the range selected e.g. 10.10.10.0/24. For the device the service runs on (OpnSense) there is a destination for 192.168.1.1/24 to LAN of the ZT network IP range you’ve set e.g. 10.10.10.22. Auth Activated for OpnSense…