Browsed by
Tag: opnsense

Setup NUT Server on Synolgoy Setup Router and XCP-NG

Setup NUT Server on Synolgoy Setup Router and XCP-NG

Synology Setup Synology DSM has already built in UPS support. In DSM using an administrative account open Control Panel – Hardware & Power – UPS. In the configuration you have the choice between “Synology UPS server” and “SNMP UPS”. The bad news is, that “SNMP UPS” are mostly very expensive. Professional UPS devices from APC have a so called “smart slot” where a proprietary optional network card from APC can be installed. While these are available for the higher-priced devices, the cards alone sometimes cost more then…

Read More Read More

OPNSense with Zerotier Setup – Network Bridge

OPNSense with Zerotier Setup – Network Bridge

Below are the steps required to get Zerotier setup on your OPNsense router to act as a network bridge between your Localnetwork and Clients with Zerotier client installed on remote networks. In ZT network screen: Managed routes: An IP assigned to the ZT network for the range selected e.g. 10.10.10.0/24. For the device the service runs on (OpnSense) there is a destination for 192.168.1.1/24 to LAN of the ZT network IP range you’ve set e.g. 10.10.10.22. Auth Activated for OpnSense…

Read More Read More